Blogger Templates Skip to main content

Cracking Forgotten Windows Password Using Sticky Key Option

  1. Boot from Windows PE or Windows RE and access the command prompt.
  2. Find the drive letter of the partition where Windows is installed. In Vista and Windows XP, it is usually C:, in Windows 7, it is D: in most cases because the first partition contains Startup Repair. To find the drive letter, type C: (or D:, respectively) and search for the Windows folder. Note that Windows PE (RE) usually resides on X:.
  3. Type the following command (replace "c:" with the correct drive letter if Windows is not located on C:):
    copy c:\windows\system32\sethc.exe c:\
    This creates a copy of sethc.exe to restore later.
  4. Type this command to replace sethc.exe with cmd.exe:
    copy /y c:\windows\system32\cmd.exe c:\windows\system32\sethc.exe
    Reboot your computer and start the Windows installation where you forgot the administrator password.
  5. After you see the logon screen, press the SHIFT key five times.
  6. You should see a command prompt where you can enter the following command to reset the Windows password (see screenshot above):
    net user your_user_name new_password
    If you don't know your user name, just type net user to list the available user names.
  7. You can now log on with the new password.
I recommend that you replace sethc.exe with the copy you stored in the root folder of your system drive in step 3. For this, you have to boot up again with Windows PE or RE because you can't replace system files while the Windows installation is online. Then you have to enter this command:
copy /y c:\sethc.exe c:\windows\system32\sethc.exe


Follow: Facebook Page

Comments

Post a Comment

Popular posts from this blog

By passing windows 7/8/8.1/10 login password using ease of access

I am almost certain that this has been covered elsewhere. If you have seen this before, then I am sorry I wasted a precious few minutes of your life. 1, Boot up using a Windows 7/8/8.1/10 Installation CD or Bootable Pendrive. 2, At the first splash screen click “INSTALL NOW” then accept the license agreement click "NEXT". 3, Press "SHIT+F10" Simultaneously. Command prompt will open up. 4, Now u need to find out at what partition your OS is installed. you can check this by typing DISKPART>LIST DISK >SELECT DISK 1 > LIST VOL and in the volumes check for the BOOT partition and note down the volume label e.g "C" (it can be different for you). 5, Type in the following commands: cd C: cd Windows/system32 copy UtilMan.exe abc.exe copy cmd.exe Utilman.exe So what did we just do here? The first two commands changed our current working directory to "/Windows/system32". This location contains both "cmd.exe" (...
Post a Comment
Read more

DHCP (Dynamic Host Configuration Protocol) | DNS (Domain Name System)

DHCP (Dynamic Host Configuration Protocol) DHCP is a network protocol that is used to assign various network parameters to a device. This greatly simplifies administration, since there is no need to assign static network parameters for each device separately. DHCP is a client-server protocol. A client is a device that is configured to use DHCP to request network parameters from a DHCP server. DHCP server maintains a pool of available IP addresses and assignes one of them to the host. A DHCP server can also provide some other parameters, such as: • subnet mask • default gateway • domain name • DNS server Cisco routers can be used as a DHCP server. DHCP process explained: DHCP client goes through the four step process:   1: A DHCP client sends a broadcast packet (DHCP Discover) to discover DHCP servers on the LAN segment. 2: The DHCP servers receive the DHCP Discover packet and respond with DHCP Offer packets, offering ...
Post a Comment
Read more

Microsoft Has Fixed Network Connectivity Issue in Windows 10

Microsoft has released out-of-band updates that resolve the Windows connectivity issue which the company had encountered last week. The issue, as you may remember, was preventing cloud apps like Microsoft Teams, Microsoft Office, Microsoft Office 365, Microsoft Outlook from their normal work, and also was affecting VPN connections. The released updates are not available via the Windows Update as of this writing. The user has to download them manually from the Microsoft Update Catalog.  The links are as follows: Windows 10, version 1909 (KB4554364 ) Windows 10, version 1903 (KB4554364 ) Windows 10, version 1809 (KB4554354 ) Windows 10, version 1803 (KB4554349 ) Windows 10, version 1709 (KB4554342 ) Source : https://docs.microsoft.com/en-us/windows/release-information/windows-message-center
Post a Comment
Read more